Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronic Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

TSMC 65nm Tech parameters

Status
Not open for further replies.

mohSAIED

Newbie level 1
Joined
Apr 25, 2012
Messages
1
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,287
Hi All,

I want to conduct some area estimation using TSMC 65nm parameters such as metal width, pitch, spacing etc..

Can you tell me where I can find this info? I do have access to the synposys and cadence design tools and the technology itself.

I asked out Technician whether he has some datasheets but he didn't know.
 

analogLow

Member level 4
Joined
Nov 18, 2010
Messages
68
Helped
14
Reputation
28
Reaction score
12
Trophy points
1,288
Location
Earth
Activity points
1,787
Hello,

If you have access to candence and the techology, then there should be a design rule manual somewhere. That will give you all the rules for width, pitch, spacing. This typically comes with a design kit (from TSMC). You will definitely need this manual when you do layout. If you dont have it in your office, I guess email TSMC with the design kit number and ask for it.
good luck,
analogLow
 

Status
Not open for further replies.
Toggle Sidebar

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Top