Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Transmitting two signals with different freq. on the same antenna at the same time

Status
Not open for further replies.

Nimer

Full Member level 3
Joined
Apr 26, 2005
Messages
178
Helped
26
Reputation
52
Reaction score
8
Trophy points
1,298
Location
PALISTINE
Activity points
2,907
dears

Can i tranmitt two signals wiht different frequencies on the same antenna at the same time , given that the antenna is not a fractal antenna.

regrads
 

Re: Antenna Question

Hi Nimer,

I think it might be possible in Dual band Dual Polarized Antenna.
 

    Nimer

    Points: 2
    Helpful Answer Positive Rating
Re: Antenna Question

yes but if the antennal has a single polarization , is it possible to transimt two signals on two frequencies at the same time even though ther frequencies are different.

regards
 

Re: Antenna Question

I think its not possible. we'll wait for Further replies.
 

    Nimer

    Points: 2
    Helpful Answer Positive Rating
Antenna Question

yes, why not?. connect a diplexer to the antenna port and the other two ports to the signal generators at f1 and f2.
 

    Nimer

    Points: 2
    Helpful Answer Positive Rating
Re: Antenna Question

You can transmit a thousand signals on a single antenna at the same time!

An obvious example is OFDM, which transmits many independent carriers simultaneously.

The only concern would be if were anywhere near the power rating of the antenna, where voltage arcing could happen.
 

    Nimer

    Points: 2
    Helpful Answer Positive Rating
Re: Antenna Question

Here may be two cases. First, you have the theoretical interest (for example, when you are student). Then the answer is yes, you can transmit two or more signals with one antenna. In the second case (when you are practical engineer) you need to carefully consider antenna parameters and do not exceed some key parameters limits like power, frequency, impedance and so on. Transmitting two high level signals with poor electrical contact in antenna circuit may result in strong RFI. Moreover, nearby objects may lead to reradiation and this is another problem.
 

    Nimer

    Points: 2
    Helpful Answer Positive Rating
Antenna Question

am a new user and lacking points to download the software
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top