[SOLVED] Transistor Connection correction

[kdg007]

is it the proper way to connect the two transistors ? i am not getting any waveform from the second transistor collector side.

 

[dselec]

**broken link removed**
recheck your tran...connection check voltage at base and collector and post without input

---------- Post added at 21:14 ---------- Previous post was at 21:13 ----------

**broken link removed**
recheck your tran...connection check voltage at base and collector and post without input

 

[kdg007]

i have calculated for 5v for both base and collector... but when i kept the function generator( Func output probe) ,the voltage for base is showing -0.8v

 

[etmabreu]

i have calculated for 5v for both base and collector... but when i kept the function generator( Func output probe) ,the voltage for base is showing -0.8v

Is your generator producing a DC component at its output?

 

[kdg007]

as you can see.i am getting a proper waveform at 10khz ...but the voltage from the generator is -0.8v ..hmm

 

[etmabreu]

Try to adjust "DC offset" in the generator.

 

[kdg007]

Thank you. dc offset has been setted properly

 

[dselec]

If u r using ltpice its a confi.. problem of your setup in spice