Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Transistor as switch

Status
Not open for further replies.

hilalgceylan

Newbie
Joined
Apr 7, 2021
Messages
2
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Activity points
17
We need to obtain 5 different transimpedance gain by using a transistor as a switch over the Cadence Simulation Environment. We have capacitor and resistors values, however we don't know how to use a transistor as a switch in Cadence. Should we give DC Voltage value to every transistor, or is there any easy way that we can use them directly?

Please, help..
 

Too much confusion, I think nobody will understand your real issue. Please, rephrase the problem and add some pictures if possible, visual aid can help a lot.
 

Are you aware that a bipolar transistor can just "switch" a voltage on/off ?
When you want to "switch" a signal - like a relay - you must use a FET.
 
Are you aware that a bipolar transistor can just "switch" a voltage on/off?
When you want to "switch" a signal - like a relay - you must use a FET.
Thanks for the information. We used NMOS transistors as switches. However, it causes stability to decrease.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top