Traffic Lights using moore state machine

[Ferfil]

Traffic Lights using moore state machine, Altera Quartus II, Verilog HDL

Please help me make a testbench for this code...


module traffiic(clk, clear, R1, R2, R3, R4, X1,X2,X3,X4);

output [1:0] R1, R2, R3, R4;
reg [1:0] R1, R2, R3, R4;
input X1, X2, X3, X4;

input clk, clear;


reg [2:0] state;
reg [2:0] next_state;


parameter RED = 2'd0;
parameter YELLOW = 2'd1;
parameter GREEN = 2'd2;


parameter G2YDELAY = 10;
parameter Y2RDELAY = 3;

parameter s0 = 3'd0;
parameter s1 = 3'd1;
parameter s2 = 3'd2;
parameter s3 = 3'd3;
parameter s4 = 3'd4;
parameter s5 = 3'd5;
parameter s6 = 3'd6;
parameter s7 = 3'd7;


initial
begin
state <= s0;
next_state <= s0;
R1 <= GREEN;
R2 <= RED;
R3 <= RED;
R4 <= RED;
end


always @(posedge clk)
state <= next_state;

always @(state)
begin
case(state)
s0:
begin
R1 <= GREEN;
R2 <= RED;
R3 <= RED;
R4 <= RED;
end

s1:
begin
R1 <= YELLOW;
R2 <= RED;
R3 <= RED;
R4 <= RED;
end

s2:
begin
R1 <= RED;
R2 <= GREEN;
R3 <= RED;
R4 <= RED;
end

s3:
begin
R1 <= RED;
R2 <= YELLOW;
R3 <= RED;
R4 <= RED;
end

s4:
begin
R1 <= RED;
R2 <= RED;
R3 <= GREEN;
R4 <= RED;
end

s5:
begin
R1 <= RED;
R2 <= RED;
R3 <= YELLOW;
R4 <= RED;
end

s6:
begin
R1 <= RED;
R2 <= RED;
R3 <= RED;
R4 <= GREEN;
end

s7:
begin
R1 <= RED;
R2 <= RED;
R3 <= RED;
R4 <= YELLOW;
end

endcase
end

always @(state or clear or X1 or X2 or X3 or X4 )
begin
if (clear)
next_state <= s0;
else
begin
case(state)
s0:
begin
repeat (G2YDELAY) @(posedge clk);
next_state <= s1;
end

s1:
if(~X2)
begin
repeat (Y2RDELAY) @(posedge clk);
next_state <= s4;
end
else
begin
repeat (Y2RDELAY) @(posedge clk);
next_state <= s2;
end

s2:
begin
repeat (G2YDELAY) @(posedge clk);
next_state <= s3;
end

s3:
if(~X3)
begin
repeat (Y2RDELAY) @(posedge clk);
next_state <= s6;
end
else
begin
repeat (Y2RDELAY) @(posedge clk);
next_state <= s4;
end

s4:
begin
repeat (Y2RDELAY) @(posedge clk);
next_state <= s5;
end

s5:
if(~X4)
begin
repeat (Y2RDELAY) @(posedge clk);
next_state <= s0;
end
else
begin
repeat (Y2RDELAY) @(posedge clk);
next_state <= s6;
end

s6:
begin
repeat (Y2RDELAY) @(posedge clk);
next_state <= s7;
end

s7:
if(~X1)
begin
repeat (Y2RDELAY) @(posedge clk);
next_state <= s2;
end
else
begin
repeat (Y2RDELAY) @(posedge clk);
next_state <= s0;
end
default : next_state <= s0;

endcase

end
end
endmodule

 

[TrickyDicky]

https://www.edaboard.com/threads/299709/#post1282216