Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Trace self-inductance relationship with adjacent trace

Status
Not open for further replies.
M

mike_bihan

Full Member level 3
Joined
Mar 21, 2002
Messages
182
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,296
Activity points
1,531
I deduced that metal trace self-inductance should not be impacted by adjacent metal trace. Right?

my reason is that since
PH1 (flux) =L11*I1+L12*I2; and we derive L11 by setting I2=0.
so the adjacent metal traces will be open, then have no impact on this metal trace's flux.

Please correct me if I am wrong. I hope some guru can help me confirm it.
 

yes, I think you are wright.

best regards



mike_bihan said:
I deduced that metal trace self-inductance should not be impacted by adjacent metal trace. Right?

my reason is that since
PH1 (flux) =L11*I1+L12*I2; and we derive L11 by setting I2=0.
so the adjacent metal traces will be open, then have no impact on this metal trace's flux.

Please correct me if I am wrong. I hope some guru can help me confirm it.
Click to expand...
 

    M

    mike_bihan

    Points: 2
    Helpful Answer Positive Rating
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top