Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Touch Screen Controller problem!

Status
Not open for further replies.
nishal

nishal

Advanced Member level 4
Joined
May 4, 2007
Messages
108
Helped
10
Reputation
20
Reaction score
5
Trophy points
1,298
Activity points
1,936
Hi all,
I am interfacing touch screen controller(ADS7846) with pic32 using SPI. Although it shows the touch coordinates, it simply shows random coordinates even when it is not touched or the touch screen cable removed.

Can anyone give the solution? or is it a normal behaviour? can anyone share a sample code for ADS7846 ?

Nishal
 

your current to touchscreen is less. noise is triggering the system. use a regulated supply for controller.

hock
 

hock said:
your current to touchscreen is less. noise is triggering the system. use a regulated supply for controller.

hock
Click to expand...

Thanks Hock, I will give a try with clean psu, although it is supplied with regulated supply.

Nishal
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top