Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronic Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

to created NC drill in allegro

Status
Not open for further replies.

saraswathir

Newbie level 1
Joined
Aug 8, 2012
Messages
1
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,287
I have created the artwork and checked in cam350,even i have generated the NC drill when i import the.drl file in cam350 both .art and .drl scale is not matching,can you please help.
 

kabaleevisu

Advanced Member level 2
Joined
Apr 14, 2010
Messages
616
Helped
85
Reputation
170
Reaction score
81
Trophy points
1,308
Location
Chennai,India
Activity points
4,512
hi sara,

scale factor should be 1 and enable the auto tool select

- - - Updated - - -

hi sara,

scale factor should be 1 and enable the auto tool select



i think when you import the nc drill in cam 350 you should select Rs274X in CAM 350
 
Last edited:

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Top