zeeshanzia84
Full Member level 3
- Joined
- May 29, 2006
- Messages
- 166
- Helped
- 35
- Reputation
- 70
- Reaction score
- 17
- Trophy points
- 1,298
- Location
- Pakistan / Germany
- Activity points
- 2,680
Hi,
I am using the Crossbow Micaz motes in a Wireless Sensor Network project. My mote uses CC2420 as its transceiver.
I was wondering if it is possible to change the transmission frequency (channel) at runtime? i.e. while the program is running.
I know how to do this using the parameter DCC2420_DEF_CHANNEL in the Makefile...however, I am willing to know if this can also be done on the fly.
Thanks a whole lot in advance.
I am using the Crossbow Micaz motes in a Wireless Sensor Network project. My mote uses CC2420 as its transceiver.
I was wondering if it is possible to change the transmission frequency (channel) at runtime? i.e. while the program is running.
I know how to do this using the parameter DCC2420_DEF_CHANNEL in the Makefile...however, I am willing to know if this can also be done on the fly.
Thanks a whole lot in advance.