Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

TIA 644 / 644A - LVDS

Status
Not open for further replies.
A

avt

Member level 5
Joined
Apr 25, 2005
Messages
86
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,286
Activity points
1,981
tia 644

Hi there - I hope someone could hel me out with a short information - I'm designing an LVDS-Driver/Receiver and have right now here only the IEEE-LVDS-1596 Standard. They say that the differential input resistance on the receiver sid should be within 90 to 110 ohm. How are the values for the TIA standard ?

I'm right now discussing about using Poly-resistors - but without additional effort we only get +/-20% max deviation - so no chance to fullfill the IEEE-standard - thought that this might be a little bit more relaxed in the TIA-standard ...
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top