anotherbrick
Full Member level 4
- Joined
- Jan 10, 2009
- Messages
- 217
- Helped
- 1
- Reputation
- 2
- Reaction score
- 1
- Trophy points
- 1,298
- Location
- Istanbul , Turkey
- Activity points
- 3,144
piccolo control stick
I bought my piccolo control stick last week
I installed the CCS and controlstick software as it is described in the document
my windowsXP SP3 recognized the controlstick automatically and didnot ask for anything
now i start setup ccs, I selected F28027 xds100 USB emulator and save & quit
After that I started CCS and selected connect under debug menu
in the headline of ccs : /F28027 XDS100 USB Emulator/TMS320C2800_0 - TMS320C28xx
the sandclock appeared and didnot disappear for minutes
It says it is connecting but nothing happens
also I cannot close CCS - it is not responding
also the device manager reports that the emulator cannot be started ( code 10 )
what can i do ?
I bought my piccolo control stick last week
I installed the CCS and controlstick software as it is described in the document
my windowsXP SP3 recognized the controlstick automatically and didnot ask for anything
now i start setup ccs, I selected F28027 xds100 USB emulator and save & quit
After that I started CCS and selected connect under debug menu
in the headline of ccs : /F28027 XDS100 USB Emulator/TMS320C2800_0 - TMS320C28xx
the sandclock appeared and didnot disappear for minutes
It says it is connecting but nothing happens
also I cannot close CCS - it is not responding
also the device manager reports that the emulator cannot be started ( code 10 )
what can i do ?