Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Thyristor Power Consumption

Status
Not open for further replies.

pcsandhya82

Member level 3
Joined
Jul 31, 2010
Messages
58
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,286
Location
Bangalore
Activity points
1,732
Does thyristor power consumption depend on average current I(t)? Or is the power consumption dependant on RMS Current?

Also, "For a given average
current, the power dissipated at small
conduction angles is much higher than at large
conduction angles. This is a result of the higher
rms currents at small conduction angles."
How can it be explained?
 

This declaration is about which circuit ?
As the Thyristors do not consume power by themselves.
 

if you want to calculate power dissipation in thyristor, you should multiply Voltage across thy with current through it and integrate this over one cycle. For half sine wave conduction I would go for average current during that period. You may also want to refer following appnote

**broken link removed**
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top