Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

thermal printer strobe signal

Status
Not open for further replies.

jdv

Newbie level 1
Newbie level 1
Joined
Jun 30, 2011
Messages
1
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Location
Chennai
Activity points
1,286
hi, i have to interface ftp 628 mcl 103 thermal printer with the microcontroller. so i need to know the procedure to send the strobe signals,syn clk signal,when to latch the data latch signal. Anyone worked on this thermal printer pls help me.
 

jdv,

You can find this information in the datasheet. The timing diagram gives you clear details of what you are asking for.
The timing details should be as given in the attachment

 
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top