Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

[SOLVED] Thermal fuse

Status
Not open for further replies.
P

pgr2002

Member level 5
Joined
Aug 1, 2013
Messages
87
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,286
Location
Hyderabad, India
Activity points
2,015
In a 1.8 litre electric cooker, what is the capacity of thermal fuse used. Whether 10a or 15a fuse is used. What is the temperature (100 degree celcius or higher) at which it will cut off. In a sense can 10a : 100 degree celcius be used. Can anyone describe what is the best one to be used.
 

Sort by date Sort by votes
The fuse has a marking...

Typically much higher cutting temperature, e.g. 150 -175 °C. But it depends of course on the position.
 

Upvote 0 Downvote
FvM said:
The fuse has a marking...

Typically much higher cutting temperature, e.g. 150 -175 °C. But it depends of course on the position.
Click to expand...
Thanks. The markings on the fuse is not clearly visible and it is blurred due to which I couldn’t get the ratings
 

Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top