Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

the questions about the rf MOSFET and the Coupler design

Status
Not open for further replies.

allan428

Newbie level 1
Joined
Jan 17, 2010
Messages
1
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,286
1.Can the 100M rf MOSFET Power Transistor be used for the 40.68M?
2.the output power is 30W,how to design the output power coupler,which is use to check the output impedance is 50Ohm or not.if it is 50Ohm,then the output is on,if not,off. the coupler is to sense the it and send the signal to control circuits to work

thanks a lot
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Top