Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

The output stage of rail to rail amplify

Status
Not open for further replies.
I

incol

Full Member level 2
Joined
Jan 18, 2005
Messages
143
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,296
Activity points
1,077
I am designing a rail to rail amplifier, and find offen use classab as the output stage, can i use classa as the output stage, is there some papers about it? thanks a lot!
 

please tell the purpose of your amplifier, how much output power is required, what kind of load is to be fed etc.
 

it can sink/source 200uA current, load is 10k resistor. Thanks
 

If only 200uA is required, of course classA can be used.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top