Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Tevion LCD 4202 After replacing

Status
Not open for further replies.
J

John Evans

Newbie level 1
Newbie level 1
Joined
Aug 3, 2014
Messages
1
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Visit site
Activity points
7
I have replaced PSU. as burn marks showed damage, red light was flashing then staying on stand bye.
After replacing the PSU. I then was advised to replace the Main board, After replacing the main Board still nothing, except the red light blinks continuously now, As I said I am a complete novice first time I taken the back of a tv. I know I should be testing things but as yet still Learning, what things are and you have to start somewhere. and Ideas would be great as I dont want to give up just yet. thanks
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top