Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Testing in benchmark circuits

Status
Not open for further replies.

smita1811

Newbie level 6
Joined
Sep 17, 2015
Messages
11
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Activity points
91
Hello All,

Although few were the previous post related to this topic, yet i could not understand how to test using benchmark circuits. Please give me some idea or links in relation with the same.

Currently i am testing using very simpe circuits like cmos inverter, nand gate etc. I have no idea how to use benchmark circuits.

Currently, I am using ngspice for simulating my circuits. Is it possible to test benchmark circuits in ngspice?
 

Benchmark tests are always based on Design Specs. So define them first.
Typical tests are Vth tolerance, Ciss, RdsOn, Ring Oscillator speed test. RdsOn or ESR is the incremental dV/dI from each rail. typical HC ESR is 300 Ohms, LVTTL is 50 Ohms ALV is 25 Ohms.
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top