Jane1
Newbie level 6
For my project I need to set up a temperature profile but the profile should NOT start from an ambient temperature ,that can be as low as 20°C , but from a higher temperature, for example from 150°C.
Also it should finish at that temperature 150°C.
Will I need two PID controllers or one will be enough?
And what kind of the controllers_ ALtec P410 or REX C100 or different?
Thank you for help
Also it should finish at that temperature 150°C.
Will I need two PID controllers or one will be enough?
And what kind of the controllers_ ALtec P410 or REX C100 or different?
Thank you for help