Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

TDC-GP1 result reading seems to not work!

Status
Not open for further replies.

blach100

Junior Member level 3
Junior Member level 3
Joined
Jul 15, 2011
Messages
30
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,286
Activity points
1,483
Hello all,

I have been trying to use TDC-GP1, the only problem I'm having is reading the results,
I have a calibrated and multiplied result which is stored in 2 16-bits registers,

I'm reading from address 0x00 with 4 strobes,
the problem is that the internal counter is not moving on when it reaches the strobe 2, which means that I have the same result in the readings 3 and 4!!

anyone one with experience with TDC-GP1 could help

thanks!
 

experienced people on TDC-GP1!
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top