Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

TCP/IP Problem on Connecting to Server

Status
Not open for further replies.
hasmibaih

hasmibaih

Junior Member level 2
Junior Member level 2
Joined
Dec 7, 2013
Messages
23
Helped
1
Reputation
2
Reaction score
0
Trophy points
8
Visit site
Activity points
286
Hi, i got a problem with my TCP IP

i use sim 900

this is my AT command and there is responds :

AT+CPIN
+CPIN: READY
OK

AT+CREG?
+CREG: 0,1
OK

AT+CGATT?
+CGATT: 1
OK

AT+CSTT="TELKOMSEL"
OK

AT+CIICR
OK

AT+CIFSR
39.212.88.84

AT+CIPSTART="TCP","182.15.42.63","9100"
OK
STATE: TCP CLOSED
CONNECT FAIL


may be you can help me, where is my mistake AT command located? i cann't connect my server
thanks
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top