Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

TCP connect fail (SIM300)

Status
Not open for further replies.

moleotov

Newbie level 3
Joined
Oct 5, 2009
Messages
3
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Location
Hungary
Activity points
1,301
Hi. I read a few topic, but still cannot establish a TCP conncetion to my server. Here are my messages:
AT
OK
at+cgdcont=1,"IP","vitamax.wap.vodafone.net"
OK
AT+CSTT="vitamax.wap.vodafone.net","vodawap","vodawap"
OK
AT+CGATT?
+CGATT: 1
OK
AT+CIICR
OK
AT+CIFSR
10.17.63.165
AT+CLPORT?
TCP: 2020
UDP: 3030
OK
AT+CDNSORIP?
+CDNSORIP: 0
OK
AT+CIPSTATUS
OK
STATE: IP STATUS
at+cipstart="TCP","188.36.84.120",3000
OK
STATE: TCP CONNECTING
CONNECT FAIL

The server works correctly. I can send characters to that from Hyperterminal TCP. Do I need any other setting? How can I solve this?
 

You can try connet www.google.com. For example AT+CIPSTART="TCP","208.69.35.231",80<CR> port is default 80. You should learning google IP adress run->cmd write ping www.google.com
 

    moleotov

    Points: 2
    Helpful Answer Positive Rating
Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top