Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Tanner standard cells

Status
Not open for further replies.

eladla

Member level 4
Joined
Jul 10, 2009
Messages
78
Helped
15
Reputation
32
Reaction score
12
Trophy points
1,288
Activity points
1,817
Hi,

I did a schematic in s-edit and exported a tpr file.
I import it to l-edit and do all the setup stuff.
When I choose to run place & route I get errors like no ABUT port
and unmatched (or something like that) Vdd ports.
So I found out that I had to have ports named ABUT drawn around the standard cells, so I drew them, and then fixed the Vdd ports so they were equidistant from the ABUT port and still I can get the thing to P&R!
I`m more or less going insane here :-x

Can anyone please help?
Is there another standard cell library that actually works?

Thank you!!!
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Top