Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Tandem routing rules- what is the gap rule ?

Status
Not open for further replies.
P

prapan

Junior Member level 3
Joined
Jun 3, 2008
Messages
26
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,451
Tandem Routing

Hi ...
I was checking out (learning rather)the tandem routing rule.There are 2 rules to be set,The gap and Length .I would like to know what the gap rule is .Is it distance 'x' as shown in fig 1 or as shown in fig 2.
If its like in Fig 1 Then wouldnt it be the width of the dielectric?
Thanks in advance
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top