Hi
I have connected sonyericsson T68i and K700i to PC through Hyperterminal using serial datacable, These both respond to AT commands, but when i connect T290i it dont respond to AT commands. any one know the reason ???
what are the pinouts of T290i ???
Hi
I have connected sonyericsson T68i and K700i to PC through Hyperterminal using serial datacable, These both respond to AT commands, but when i connect T290i it dont respond to AT commands. any one know the reason ???
what are the pinouts of T290i ???
Hello isar,
I was just googling for for pinouts myself. In case You didn't find anything of value I would like to share what I found. If You look at page nine You can read pin outs for the connector on handset and it says: pin8=DTMS pin9=DFMF which means rx resp tx lines. Surprisingly, as You I've looked at pinouts.ru, and found other 11pin connectors pin outs. For instant T100 has pin4=DTMS pin5=DFMF according to pinouts.ru. None of these isn't veryfied by myself. Let me know if this info was usable. **broken link removed**
Have fun /jaa