Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Synopsys Design Analyzer Problem !!

Status
Not open for further replies.

skjeon

Newbie level 3
Joined
Nov 11, 2004
Messages
3
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
21
synopsys error id=489925

After "design_analyzer & " command DA display OK.
But when I try to read verilog or vhdl files, I am getting the following error

-----------------------------------
Initializing...
Error id=489925

Fatal: Internal system error, cannot recover.
---------------------------------------

I am using redhat linux 7.3, design analyzer version (synopsys.2001.08 for linux)
What is the solution ?
I changed the other version(2003.12-SP1) but it isn't also working.
I'll wait for your help and advice.
Thanks.
 

treebear

Full Member level 2
Joined
Aug 6, 2001
Messages
123
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,296
Activity points
879
error id 489925 in synopsys design analyzer

Maybe you could use des!gn_vis!on instead of design @nalysis.
 

amarnath

Advanced Member level 1
Joined
Apr 24, 2003
Messages
402
Helped
26
Reputation
52
Reaction score
7
Trophy points
1,298
Activity points
3,141
both of them seem to have a problem on rh 9.0 and even on fedora.this issue has been discussed earlier by roli.its because of the gui used by these programs which dont seem to be compatible with red hat versions.best thing is to install them on rh 7.2.if not for design vision just run
"design vision -no_gui"
and then type "start gui" both these without quotes.but for me they have not solved the problem completely

regards
amarnath
 

xypxyp87

Newbie level 5
Joined
Nov 10, 2004
Messages
9
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
57
After "design_analyzer & " command DA display OK.
Don't use "file->read" menu to read files.
You can open command window and use "read -f ....." command
This maybe a bug in dc for linux.
Or you can use design_vision.
My dc version is 2003.03 (rh linux 9.0)
 

kwkam

Full Member level 5
Joined
Feb 25, 2002
Messages
276
Helped
30
Reputation
60
Reaction score
13
Trophy points
1,298
Location
Somewhere on earth
Activity points
1,886
You have to check the error message log file. Is the verilog and VHDL readin license missing!
 

konqueror

Full Member level 1
Joined
Nov 27, 2004
Messages
96
Helped
2
Reputation
4
Reaction score
2
Trophy points
1,288
Activity points
808
not a problem of license.but its a bug of dc 2003.06 .a problem with the gui used by linux (motif etc).but better to contact support of synopsys directly or download some service packs from their site
 

eins99

Full Member level 1
Joined
Jan 4, 2003
Messages
98
Helped
2
Reputation
4
Reaction score
0
Trophy points
1,286
Activity points
1,159
Could you name out the ServicePacks' names clearly ?
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Top