Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

suggest a motor driver.... pls help

Status
Not open for further replies.

nirmal_rockin

Junior Member level 2
Joined
Aug 8, 2009
Messages
22
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Location
India
Activity points
1,452
I need to build a h bridge for two motors for which i need a motor driver which can operate at 24v and above 20 Amperes
pls help
thanks....
 

Mosfets suits your requirement. There are lot of mosfet designs in the internet.

Nandhu
 

nirmal_rockin said:
I need to build a h bridge for two motors for which i need a motor driver which can operate at 24v and above 20 Amperes
pls help
thanks....

You should go to www.irf.com This is the biggest manufacturer of MOSFETs, IGBTs, drivers for them and etc. There are also good application notes there. Look them. Choose suitable components and drivers according to the motor's type (DC, BLDC, AC...).
You should also think about such things as current control, velocity and position control, any regulator (PID for example) for these. If velocity and position control may be not necessary, current control is obligatory.
Good luck!
 
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top