Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

[ARM] STM32 I/O port control register

Status
Not open for further replies.
V

Veketti

Full Member level 3
Joined
Sep 14, 2014
Messages
164
Helped
0
Reputation
0
Reaction score
0
Trophy points
16
Activity points
1,700
Hi,

Quick guestion. Have I understood correctly that this:
GPIOA -> BSRR = GPIO_Pin_9
Pulls pin PA9 high
and
GPIOA -> BRR = GPIO_Pin_9
Pulls pin PA9 low?

Thank you in advance.
 

Hi,

Yes.
But I wonder why you ask.
There are so many tutorials, explanations, example codes...

Klaus
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top