Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

STM32 and I2C port

emreer3442

Newbie
Joined
Jun 28, 2021
Messages
4
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Activity points
47
Hello everyone who love microchips! Last year I use SMT32F446RET microchips. It kind a good chip for Rocket avionics PCB. I ran into many problems about I2C port. I thought using external pull-up resistor for more powerful logic is nice but i could not run my barometric sensor (BMP180-BMP280) on my PCB. After I rip off these pull-up resistors(connected to SDA-SCL pins, 4k7ohm), problem is solved why this happened I still not understand. If any one know what happened this stuff, please tell me I will be really appreciated. :)

Ekran görüntüsü 2021-10-19 223629.png
Ekran görüntüsü 2021-10-19 223550.png
 

Attachments

  • Ekran görüntüsü 2021-10-19 223550.png
    Ekran görüntüsü 2021-10-19 223550.png
    9.4 KB · Views: 24
  • SGST-S-A0000954273-1.pdf
    2.8 MB · Views: 5

KlausST

Super Moderator
Staff member
Joined
Apr 17, 2014
Messages
20,800
Helped
4,496
Reputation
9,004
Reaction score
4,563
Trophy points
1,393
Activity points
137,345
Hi,

We need a schematic, all the SCL and SDA routing, connected devices, speed, code...and maybe most of all a detailed error description.

Klaus
 

LaTeX Commands Quick-Menu:

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Top