Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

stepper motor controlled by joystick

Status
Not open for further replies.

wizzz

Junior Member level 3
Joined
Aug 28, 2006
Messages
27
Helped
1
Reputation
2
Reaction score
1
Trophy points
1,283
Location
quebec city
Activity points
1,430
joystick to stepper motor

i search shematic for stepper motor control by joystick
Tanks and merry christmast
 

ashad

Full Member level 6
Joined
Mar 28, 2006
Messages
394
Helped
40
Reputation
80
Reaction score
27
Trophy points
1,308
Location
Trento, Italy
Activity points
3,296
stepper with joystick

if u want then u have to design ur self you take joy stick and then connect the upper and lower switches of the joy stick to the stepper driver card for forward and reverse direction selection of the stepper motor

it is very easy ....... if u want any assistant to design stepper driver the feel free to ask....... but plz tell me the phase and current per winding of ur stepper motor
 

VSMVDD

Banned
Joined
Jun 12, 2005
Messages
646
Helped
92
Reputation
184
Reaction score
34
Trophy points
1,308
Location
scotland uk
Activity points
0
stepper motor joystick

a good idea is to use some hall effect ic's and a-d sample them using a pic
just build a board the same as the one inside the joypad box add the pic and serial design
then there is no moving buttons or pots

and many possible steps to easy 16 bit divisions 10 bit for pic16 series only some pic18 +will use 16 bit a-d

very finite adjustments is possible and also acceloration in direction

a hall effect is three poles and a voltage increases the closer you place a magnet

youll find magnets to use in fridges
you can fashion this easier to make is a dot and build a couple if needed on top of each other to increase the field
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Top