Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Start up voltage of Atmel SAM3N00B microcontroller?

Status
Not open for further replies.
T

treez

Guest
What is the minimum vcc voltage at which all Atmel SAM3N00B microcontroller parts from any production batch can be gauranteed to start up?

Page 696 of the datasheet appears to say that the SAM3N00B may start up at any voltage between 1.62V and 3.6V..-but is it garanteed to start up at 1.62V?

SAM3N00B microcontroller datasheet
http://www.atmel.com/Images/doc11011.pdf
 

Never worked with ATMEL Cortex-M3 core, but the answer would be the same even if I was using it. If there is no errata sheet or something (which is difficult since we are talking about supply voltage range) to claim the opposite, I find no reason why it is not guaranteed. Have you noticed something different?
 
  • Like
Reactions: treez

    T

    Points: 2
    Helpful Answer Positive Rating
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top