Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

standard color of power wires

Status
Not open for further replies.

khanh

Junior Member level 1
Joined
Mar 30, 2002
Messages
18
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
83
standard color of ground

Hi everyone,

Could any one tell me that what are standard color of power wires for DC :+5V, - 5V, +12V, - 12V and also AC110V/220V. I 'm very please if you could give me both American Standard and International Standard.

Thanks a lot,

Khanh
 

color

Pin Name Color Description
1 PG Orange Power Good, +5 VDC when all voltages has stabilized.
2 +5V Red +5 VDC (or n/c)
3 +12V Yellow +12 VDC
4 -12V Blue -12 VDC
5 GND Black Ground
6 GND Black Ground

see **broken link removed**

i do not know if this is standard but atx ps usese this

regards

cancel
 

Thanks

I love this Board! Thanks "cancel" your Post was very helpful - Thank you!
 

US AC 117V Black - hot White - neutral Green - ground
US AC 234V Black - hot Red - hot White - neutral Green - ground

Sometimes the green wire is bare copper with no insulation and that's okay, too!
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top