Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Stack trace problem after placeDesign command

Status
Not open for further replies.

Shweta Malik

Newbie level 1
Newbie level 1
Joined
Mar 13, 2015
Messages
1
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Visit site
Activity points
7
Hi All,

I am experiencing this weird problem. My encounter exits out after the PlaceDesign Step and gives a stack trace to file message.

I have tried using encounter -64 -simplefont
But not helpful, I still get the same problem. Really need help on this one. Since, I see no error and it just exits out.
Here's what I get in my log file:

Pin Density = 0.731.
= total # of pins 9928 / total Instance area 13580.
**WARN: (TA-146): A timing loop was found. See file 'CTE_loops.rpt' for detailed information about this timing loop and all timing loops subsequently found.
Checking spec file integrity...
Clock gating cells determined by native netlist tracing.
Iteration 1: Total net bbox = 1.333e-11 (0.00e+00 1.33e-11)
Est. stn bbox = 1.333e-11 (0.00e+00 1.33e-11)
cpu = 0:00:00.0 real = 0:00:00.0 mem = 310.4M
Iteration 2: Total net bbox = 1.333e-11 (0.00e+00 1.33e-11)
Est. stn bbox = 1.333e-11 (0.00e+00 1.33e-11)
cpu = 0:00:00.0 real = 0:00:00.0 mem = 310.4M
Iteration 3: Total net bbox = 8.509e+02 (4.32e+02 4.19e+02)
Est. stn bbox = 8.509e+02 (4.32e+02 4.19e+02)
cpu = 0:00:00.2 real = 0:00:00.0 mem = 310.5M
Iteration 4: Total net bbox = 2.736e+04 (1.38e+04 1.36e+04)
Est. stn bbox = 2.736e+04 (1.38e+04 1.36e+04)
cpu = 0:00:01.1 real = 0:00:01.0 mem = 310.5M
Iteration 5: Total net bbox = 3.237e+04 (1.61e+04 1.62e+04)
Est. stn bbox = 3.237e+04 (1.61e+04 1.62e+04)
cpu = 0:00:00.5 real = 0:00:01.0 mem = 310.5M
Iteration 6: Total net bbox = 3.131e+04 (1.56e+04 1.57e+04)
Est. stn bbox = 3.131e+04 (1.56e+04 1.57e+04)
cpu = 0:00:00.2 real = 0:00:00.0 mem = 310.5M
Iteration 7: Total net bbox = 3.204e+04 (1.59e+04 1.61e+04)
Est. stn bbox = 3.747e+04 (1.87e+04 1.88e+04)
cpu = 0:00:00.1 real = 0:00:00.0 mem = 310.7M
/opt/cadence/installs/EDI101/tools.lnx86/fe/bin/64bit/encounter(syStackTrace+0x12f)[0x798a5e9]
/opt/cadence/installs/EDI101/tools.lnx86/fe/bin/64bit/encounter[0x14a7b0a]
/lib64/libpthread.so.0[0x3adf40eca0]
/lib64/libc.so.6(gsignal+0x35)[0x3ade82ffc5]
/lib64/libc.so.6(abort+0x110)[0x3ade831a70]
/opt/cadence/installs/EDI101/tools.lnx86/fe/bin/64bit/encounter[0x3a30800]
/opt/cadence/installs/EDI101/tools.lnx86/fe/bin/64bit/encounter[0x3a37867]
/opt/cadence/installs/EDI101/tools.lnx86/fe/bin/64bit/encounter[0x3a379f9]
/opt/cadence/installs/EDI101/tools.lnx86/fe/bin/64bit/encounter[0x3a41e3a]
/opt/cadence/installs/EDI101/tools.lnx86/fe/bin/64bit/encounter(_Z11nlpCGSolverP9nlpHandleiPdPvPFdiS1_S2_EPFvS1_iS1_S2_EiS1_PiS1_+0x1a7)[0x38492f7]
/opt/cadence/installs/EDI101/tools.lnx86/fe/bin/64bit/encounter(_Z9nlpSolverP11nlpFunctionPdPvS1_PiS1_+0x3b)[0x3848c4b]
/opt/cadence/installs/EDI101/tools.lnx86/fe/bin/64bit/encounter(_Z21spPlaceInstArrWithEWFiPP6dbsNetii+0x11a)[0x3a3047a]
/opt/cadence/installs/EDI101/tools.lnx86/fe/bin/64bit/encounter(_Z21spRefineCriticalPath1iPP6dbsNetiiidPd+0xdb)[0x3a342cb]
/opt/cadence/installs/EDI101/tools.lnx86/fe/bin/64bit/encounter[0x3a08e0b]
/opt/cadence/installs/EDI101/tools.lnx86/fe/bin/64bit/encounter(_Z14spUpdateNetWt0iiiP8_IO_FILEPci+0x586)[0x3a09696]
/opt/cadence/installs/EDI101/tools.lnx86/fe/bin/64bit/encounter(_Z24stUpdateNetWtOnSlackNSP2P7dbsHeadP10spsSecHeadii+0x363)[0x39fffa3]
/opt/cadence/installs/EDI101/tools.lnx86/fe/bin/64bit/encounter(_Z13spIPlaceForNPP7dbsHeadP10spsSecHeadPci+0x22ee)[0x38bb34e]
/opt/cadence/installs/EDI101/tools.lnx86/fe/bin/64bit/encounter(_Z6spMainP7dbsHead+0x197d)[0x394486d]
/opt/cadence/installs/EDI101/tools.lnx86/fe/bin/64bit/encounter[0x15e1c7c]
/opt/cadence/installs/EDI101/tools.lnx86/fe/bin/64bit/encounter(TclInvokeStringCommand+0x58)[0x9033338]
/opt/cadence/installs/EDI101/tools.lnx86/fe/bin/64bit/encounter(TclEvalObjvInternal+0x13d)[0x903413d]
/opt/cadence/installs/EDI101/tools.lnx86/fe/bin/64bit/encounter[0x905625d]
/opt/cadence/installs/EDI101/tools.lnx86/fe/bin/64bit/encounter(TclCompEvalObj+0x9b)[0x905566b]
/opt/cadence/installs/EDI101/tools.lnx86/fe/bin/64bit/encounter(TclObjInterpProc+0x2b8)[0x907f908]
/opt/cadence/installs/EDI101/tools.lnx86/fe/bin/64bit/encounter(TclEvalObjvInternal+0x13d)[0x903413d]
/opt/cadence/installs/EDI101/tools.lnx86/fe/bin/64bit/encounter[0x905625d]
/opt/cadence/installs/EDI101/tools.lnx86/fe/bin/64bit/encounter(TclCompEvalObj+0x9b)[0x905566b]
/opt/cadence/installs/EDI101/tools.lnx86/fe/bin/64bit/encounter(Tcl_EvalObjEx+0x1df)[0x903513f]
/opt/cadence/installs/EDI101/tools.lnx86/fe/bin/64bit/encounter(Tcl_IfObjCmd+0xf5)[0x903b935]
/opt/cadence/installs/EDI101/tools.lnx86/fe/bin/64bit/encounter(TclEvalObjvInternal+0x13d)[0x903413d]
/opt/cadence/installs/EDI101/tools.lnx86/fe/bin/64bit/encounter[0x905625d]
/opt/cadence/installs/EDI101/tools.lnx86/fe/bin/64bit/encounter(TclCompEvalObj+0x9b)[0x905566b]
/opt/cadence/installs/EDI101/tools.lnx86/fe/bin/64bit/encounter(Tcl_EvalObjEx+0x1df)[0x903513f]
/opt/cadence/installs/EDI101/tools.lnx86/fe/bin/64bit/encounter(Tcl_IfObjCmd+0xf5)[0x903b935]
/opt/cadence/installs/EDI101/tools.lnx86/fe/bin/64bit/encounter(TclEvalObjvInternal+0x13d)[0x903413d]
/opt/cadence/installs/EDI101/tools.lnx86/fe/bin/64bit/encounter[0x905625d]
/opt/cadence/installs/EDI101/tools.lnx86/fe/bin/64bit/encounter(TclCompEvalObj+0x9b)[0x905566b]
/opt/cadence/installs/EDI101/tools.lnx86/fe/bin/64bit/encounter(TclObjInterpProc+0x2b8)[0x907f908]
/opt/cadence/installs/EDI101/tools.lnx86/fe/bin/64bit/encounter(TclEvalObjvInternal+0x13d)[0x903413d]
/opt/cadence/installs/EDI101/tools.lnx86/fe/bin/64bit/encounter(Tcl_EvalEx+0x19e)[0x9034b2e]
/opt/cadence/installs/EDI101/tools.lnx86/fe/bin/64bit/encounter(Tcl_EvalObjEx+0x65)[0x9034fc5]
/opt/cadence/installs/EDI101/tools.lnx86/fe/bin/64bit/encounter(Tcl_EvalObjCmd+0x3f)[0x90393af]
/opt/cadence/installs/EDI101/tools.lnx86/fe/bin/64bit/encounter(TclEvalObjvInternal+0x13d)[0x903413d]
/opt/cadence/installs/EDI101/tools.lnx86/fe/bin/64bit/encounter[0x905625d]
/opt/cadence/installs/EDI101/tools.lnx86/fe/bin/64bit/encounter(TclCompEvalObj+0x9b)[0x905566b]
/opt/cadence/installs/EDI101/tools.lnx86/fe/bin/64bit/encounter(TclObjInterpProc+0x2b8)[0x907f908]
/opt/cadence/installs/EDI101/tools.lnx86/fe/bin/64bit/encounter(TclEvalObjvInternal+0x13d)[0x903413d]
/opt/cadence/installs/EDI101/tools.lnx86/fe/bin/64bit/encounter(Tcl_EvalEx+0x19e)[0x9034b2e]
/opt/cadence/installs/EDI101/tools.lnx86/fe/bin/64bit/encounter(Tcl_FSEvalFile+0x189)[0x906dae9]
/opt/cadence/installs/EDI101/tools.lnx86/fe/bin/64bit/encounter(Tcl_SourceObjCmd+0x36)[0x9040316]
/opt/cadence/installs/EDI101/tools.lnx86/fe/bin/64bit/encounter(TclEvalObjvInternal+0x13d)[0x903413d]
/opt/cadence/installs/EDI101/tools.lnx86/fe/bin/64bit/encounter(Tcl_EvalEx+0x19e)[0x9034b2e]
/opt/cadence/installs/EDI101/tools.lnx86/fe/bin/64bit/encounter(Tcl_EvalObjEx+0x65)[0x9034fc5]
/opt/cadence/installs/EDI101/tools.lnx86/fe/bin/64bit/encounter[0x907722b]
/opt/cadence/installs/EDI101/tools.lnx86/fe/bin/64bit/encounter(Tcl_NamespaceObjCmd+0x146)[0x90766a6]
/opt/cadence/installs/EDI101/tools.lnx86/fe/bin/64bit/encounter(TclEvalObjvInternal+0x13d)[0x903413d]
/opt/cadence/installs/EDI101/tools.lnx86/fe/bin/64bit/encounter[0x905625d]
/opt/cadence/installs/EDI101/tools.lnx86/fe/bin/64bit/encounter(TclCompEvalObj+0x9b)[0x905566b]
/opt/cadence/installs/EDI101/tools.lnx86/fe/bin/64bit/encounter(Tcl_EvalObjEx+0x1df)[0x903513f]
/opt/cadence/installs/EDI101/tools.lnx86/fe/bin/64bit/encounter(Tcl_CatchObjCmd+0x46)[0x9038e76]
/opt/cadence/installs/EDI101/tools.lnx86/fe/bin/64bit/encounter(TclEvalObjvInternal+0x13d)[0x903413d]
/opt/cadence/installs/EDI101/tools.lnx86/fe/bin/64bit/encounter[0x905625d]
/opt/cadence/installs/EDI101/tools.lnx86/fe/bin/64bit/encounter(TclCompEvalObj+0x9b)[0x905566b]
/opt/cadence/installs/EDI101/tools.lnx86/fe/bin/64bit/encounter(Tcl_EvalObjEx+0x1df)[0x903513f]
/opt/cadence/installs/EDI101/tools.lnx86/fe/bin/64bit/encounter(Tcl_IfObjCmd+0xf5)[0x903b935]
/opt/cadence/installs/EDI101/tools.lnx86/fe/bin/64bit/encounter(TclEvalObjvInternal+0x13d)[0x903413d]
/opt/cadence/installs/EDI101/tools.lnx86/fe/bin/64bit/encounter[0x905625d]
/opt/cadence/installs/EDI101/tools.lnx86/fe/bin/64bit/encounter(TclCompEvalObj+0x9b)[0x905566b]
/opt/cadence/installs/EDI101/tools.lnx86/fe/bin/64bit/encounter(Tcl_EvalObjEx+0x1df)[0x903513f]
/opt/cadence/installs/EDI101/tools.lnx86/fe/bin/64bit/encounter(Tcl_IfObjCmd+0xf5)[0x903b935]
/opt/cadence/installs/EDI101/tools.lnx86/fe/bin/64bit/encounter(TclEvalObjvInternal+0x13d)[0x903413d]
/opt/cadence/installs/EDI101/tools.lnx86/fe/bin/64bit/encounter[0x905625d]
/opt/cadence/installs/EDI101/tools.lnx86/fe/bin/64bit/encounter(TclCompEvalObj+0x9b)[0x905566b]
/opt/cadence/installs/EDI101/tools.lnx86/fe/bin/64bit/encounter(TclObjInterpProc+0x2b8)[0x907f908]
/opt/cadence/installs/EDI101/tools.lnx86/fe/bin/64bit/encounter(TclEvalObjvInternal+0x13d)[0x903413d]
/opt/cadence/installs/EDI101/tools.lnx86/fe/bin/64bit/encounter[0x905625d]
/opt/cadence/installs/EDI101/tools.lnx86/fe/bin/64bit/encounter(Tcl_ExprObj+0x1d6)[0x90552a6]
/opt/cadence/installs/EDI101/tools.lnx86/fe/bin/64bit/encounter(Tcl_ExprBooleanObj+0x23)[0x9035793]
/opt/cadence/installs/EDI101/tools.lnx86/fe/bin/64bit/encounter(Tcl_IfObjCmd+0x171)[0x903b9b1]
/opt/cadence/installs/EDI101/tools.lnx86/fe/bin/64bit/encounter(TclEvalObjvInternal+0x13d)[0x903413d]
/opt/cadence/installs/EDI101/tools.lnx86/fe/bin/64bit/encounter(Tcl_EvalEx+0x19e)[0x9034b2e]
/opt/cadence/installs/EDI101/tools.lnx86/fe/bin/64bit/encounter(Tcl_FSEvalFile+0x189)[0x906dae9]
/opt/cadence/installs/EDI101/tools.lnx86/fe/bin/64bit/encounter(Tcl_EvalFile+0x2e)[0x906ca3e]
/opt/cadence/installs/EDI101/tools.lnx86/fe/bin/64bit/encounter(_Z11TclApp_InitP10Tcl_Interp+0x7526)[0x1503de6]
/opt/cadence/installs/EDI101/tools.lnx86/fe/bin/64bit/encounter(Tcl_AppInit+0x228)[0x14394a8]
/opt/cadence/installs/EDI101/tools.lnx86/lib/64bit/libtq.so(_ZN13TqApplication4execEv+0x104)[0x2b7a2ae421b2]
/opt/cadence/installs/EDI101/tools.lnx86/fe/bin/64bit/encounter(_Z7fe_mainiPPc+0x307)[0x1438ed7]
/opt/cadence/installs/EDI101/tools.lnx86/fe/bin/64bit/encounter(main+0x60)[0x1438fa0]
/lib64/libc.so.6(__libc_start_main+0xf4)[0x3ade81d9f4]
/opt/cadence/installs/EDI101/tools.lnx86/fe/bin/64bit/encounter[0x1438a2a]
========================================
gdb
========================================
Using: gdb
[Thread debugging using libthread_db enabled]
[New Thread 0x2b7a2c6114a0 (LWP 24168)]
[New Thread 0x2b7a3070f940 (LWP 24226)]
[New Thread 0x2b7a2fd0e940 (LWP 24223)]
[New Thread 0x2b7a2f103940 (LWP 24222)]
[New Thread 0x2b7a2e700940 (LWP 24221)]

warning: no loadable sections found in added symbol-file system-supplied DSO at 0x7fff929fd000
0x0000003ade899e0f in waitpid () from /lib64/libc.so.6

Thread 5 (Thread 0x2b7a2e700940 (LWP 24221)):
#0 0x0000003adf40e351 in nanosleep () from /lib64/libpthread.so.0
#1 0x0000000001e095ec in rdaiLicRecheck ()
#2 0x0000003adf40683d in start_thread () from /lib64/libpthread.so.0
#3 0x0000003ade8d4fcd in clone () from /lib64/libc.so.6

Thread 4 (Thread 0x2b7a2f103940 (LWP 24222)):
#0 0x0000003ade89a201 in nanosleep () from /lib64/libc.so.6
#1 0x0000003ade89a024 in sleep () from /lib64/libc.so.6
#2 0x000000000799d611 in syiPeakMem ()
#3 0x0000003adf40683d in start_thread () from /lib64/libpthread.so.0
#4 0x0000003ade8d4fcd in clone () from /lib64/libc.so.6

Thread 3 (Thread 0x2b7a2fd0e940 (LWP 24223)):
#0 0x0000003ade8ce162 in select () from /lib64/libc.so.6
#1 0x0000000009095f8d in NotifierThreadProc ()
#2 0x0000003adf40683d in start_thread () from /lib64/libpthread.so.0
#3 0x0000003ade8d4fcd in clone () from /lib64/libc.so.6

Thread 2 (Thread 0x2b7a3070f940 (LWP 24226)):
#0 0x0000003adf40e9c8 in do_sigwait () from /lib64/libpthread.so.0
#1 0x0000003adf40ea6d in sigwait () from /lib64/libpthread.so.0
#2 0x00000000014a7f83 in ctrlCHandle ()
#3 0x0000003adf40683d in start_thread () from /lib64/libpthread.so.0
#4 0x0000003ade8d4fcd in clone () from /lib64/libc.so.6

Thread 1 (Thread 0x2b7a2c6114a0 (LWP 24168)):
#0 0x0000003ade899e0f in waitpid () from /lib64/libc.so.6
#1 0x0000003ade83c4a1 in do_system () from /lib64/libc.so.6
#2 0x0000003ade83c7f7 in system () from /lib64/libc.so.6
#3 0x000000000798a641 in syStackTrace ()
#4 0x00000000014a7b0a in rdaiErrorHandler ()
#5 <signal handler called>
#6 0x0000003ade82ffc5 in raise () from /lib64/libc.so.6
#7 0x0000003ade831a70 in abort () from /lib64/libc.so.6
#8 0x0000000003a30800 in spFatalASSERT ()
#9 0x0000000003a37867 in spiComputeInst2InstG ()
#0 0x0000003ade899e0f in waitpid () from /lib64/libc.so.6
The program is running. Quit anyway (and detach it)? (y or n) [answered Y; input not from terminal]

*** INTERRUPTED *** [signal 1]
24168: No such process
 
Last edited by a moderator:

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top