Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronic Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

SPWM Inverter Calculate DC bus current

Status
Not open for further replies.

SS1_Raptor

Junior Member level 1
Joined
Feb 16, 2019
Messages
17
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Activity points
148
Hello everyone,

I am designing an SPWM inverter

The output is 220 V 2.5A
DC BUS Voltage 320V

what should the minimum of DC bus Current ?
 

KlausST

Super Moderator
Staff member
Joined
Apr 17, 2014
Messages
19,271
Helped
4,269
Reputation
8,541
Reaction score
4,234
Trophy points
1,393
Activity points
127,921
Hi,

Take a piece of paper and draw the exoected currents.

You will soon find out that your information is no sufficient.
* I assume the 220V, 2.5A is AC....but what kind of AC? RMS or amplitude or peak to peak?
What phase angle?
What is the expected inverter efficiency at this load?

And what DC bus current?
* The absolute maximum peak value (within 100ns or so)
* Or the maximum expectable average current?

Klaus
 

Easy peasy

Advanced Member level 5
Joined
Aug 15, 2015
Messages
2,913
Helped
1,048
Reputation
2,096
Reaction score
1,070
Trophy points
113
Location
Melbourne
Activity points
16,175
220Vac rms is 311 Vpk, a 320V bus is a little light for this, the DC bus current will be the average current flowing to the load:

for 2.5A rms, assuming all real power, the Po = 220x2.5 = 550 watts divided by 325 Vbus say = 1.70 amps DC average ...
 
Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Top