Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

spectre model in hspice

Status
Not open for further replies.
J

jutek

Full Member level 4
Joined
Oct 21, 2005
Messages
211
Helped
6
Reputation
12
Reaction score
1
Trophy points
1,298
Activity points
3,140
hello

can you tell me how to convert spectre model to work in hspice simulation?

regards
 

I will recmmend downloading the NCSU CDK which has both spectre and HSPICE simulation model files. By comparing them you can do that.

One important thing as far as I know is spectre is a case sensitive language. SPICE is case insensitive.

You need not to specify all the model parameters in spectre in the same order while you need to do that in SPICE AFAIK.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top