Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronic Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Specification relating GSM static sensitivity

Status
Not open for further replies.

RiffMaster

Member level 1
Joined
Feb 14, 2005
Messages
34
Helped
7
Reputation
14
Reaction score
6
Trophy points
1,288
Activity points
288
Does anybody know what is the latest specification for GSM 850/900/1800/1900, mobile conducted static sensitivity? While ago was –102dBm but now I think is –104dBm.
The static sensitivity is for RBER = 2.4%, or for BER=0.2%? Please confirm.
thanks
 

mogwai

Full Member level 3
Joined
Jan 21, 2003
Messages
159
Helped
13
Reputation
26
Reaction score
7
Trophy points
1,298
Location
Greece
Activity points
1,299
sensitivity for gsm

You should check the latest GSM spec:
/http://webapp.etsi.org/key/queryform.asp

Look for GSM 05.05 (Radio transmission and reception)...

Actually sensitivity levels for MS's are varying between -102 and -104dBm for different GSM implementations (850, 900, 1800 etc)

For static sensitivity's BER see Table 1 in Section 6...

mog.
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Top