Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Source for 16ch datalogger with Atmel AVR needed

Status
Not open for further replies.

panalog9

Full Member level 2
Joined
Feb 25, 2002
Messages
133
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,296
Location
USA
Activity points
855
Does anyone know a good source for a 16 channel datalogger based on an AVR ?

I'm certain it's been done before, and rather than reinvent the wheel, something like this would give me a good start.

I'm thinking of using an AT90S2313-10 with a pair of m@xim m@x186 a/d chips and a 64mbit Atmel serial dataflash for storage. Probably add on a Dallas DS1302 or 1305/6 for a RTC.

I've never done mixed digital and analog before, so I'm reading up on the caveats for the pcb design.

Any ideas ? Comments ?
 

Wow - no responses ? No-one has any information on dataloggers or AVR ?

How about mixing digital an analog signals on the PCB ? I'm learning, but experienced hints are always welcome.
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top