Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronic Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Solidworks design study query

Zorah_Ahmad

Newbie level 6
Joined
Aug 20, 2019
Messages
11
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Activity points
95
I'm new to Solidworks and I am attempting to carry out a design study. I carried out a static analysis as shown in figure q

As you can see the max deflection is 3.752 um whereas the min deflection is -1.054 e-7 m. I wanted to optimize certain dimensions such that the displacement of 3.752 um is further maximized. I attempted to do so according to the guidelines provided online but for some reason, the optimization process attempts to maximize the -1.054 e-7 m deflection instead of the 3.752 um deflection as shown in figure 2

What should I do to rectify this?
 

Attachments


Toggle Sidebar

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Top