Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

[SOLVED] smith chart problem

Status
Not open for further replies.

prety

Newbie level 5
Joined
Nov 23, 2013
Messages
8
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Activity points
39
hello can anybody help me regarding my smith chart whether it is wrong or it is correct...i am attaching my antenna smith chart

smith.png
 
Last edited by a moderator:

Um.. it was there. It still is, though you may have attempted an edit.

The chart itself looks like the impedance went around the circle several times, and never approached a match.
That sort of thing tends to look like a piece of series transmission line (a bit).
Nobody can say whether it is "wrong" or "correct". It is the impedance plot of the structure you were simulating.
 

well, a 25 ohm load on a 100 ohm transmission line would do approximately what you show. What are your specifics.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top