Small Size PCB mount power Relay

[panneerrajan]

HI,

My exist device pcb stack have 9mm space only. we need to place small sice power Relay. Relay height should be 8mm.
Specification:
Coil volt:5V
Contact Rate: 230VAC & 24VDC with 1Amps
Type: PCB mount SPST
Application: MD controller (Energy meter) to control Breaker / Contactors.

Any body Know with above spec. pls. suggest me the part no.

 

[Embedded_Geek]

MD controller (Energy meter) to control Breaker / Contactors.

Are you talking about maximum demand here, and cutting-off the load (i.e., household AC supply)

If Yes,
Then I think 1A relay is not sufficient to handle the entire load of a house.

Please check that first.

 

[jiripolivka]

Are you talking about maximum demand here, and cutting-off the load (i.e., household AC supply)

If Yes,
Then I think 1A relay is not sufficient to handle the entire load of a house.

Please check that first.

I am afraid there is no such device also meeting safety requirements : 1 A at 230 V means 230 W.

I would suggest you to use a small-size low-voltage relay on PCB, then use a larger relay separated from the PCB for the high load.

 

[Gorgon]

Try this: **broken link removed**