simulation in vivado vs ISIM(in Xilinx ISE)

Status
Not open for further replies.

rafimiet

Member level 5
Joined
May 21, 2015
Messages
94
Helped
1
Reputation
2
Reaction score
1
Trophy points
1,288
Activity points
2,364
I have been using Xilinx ISE and ISIM for quite a few years now. But now, due to some reasons, I have to switch to Vivado. I can not find the simulation setup in vivado the same way as ISIM. Also I am not much familiar with Vivado. Firstly, ISE would auto generate the test bench, which needed small modifications to serve your purpose. Secondly there were manual simulations possible in ISIM. The test vectors were generated using the command PUT (for example: put a 10101010). Can I have similar kind of simulations in Vivado? Or has it become simpler in Vivado in any respect?
 

I can not find the simulation setup in vivado the same way as ISIM.
Click to expand...

Left-hand corner, Project Manager --> Settings will open up the Settings window. From there just select Simulation and you will get its options.

I think you should read the latest version of the ug910-vivado-getting-started.pdf and play around with the tool for sometime.

Vivado is much better, have fun!
 

Left-hand corner, Project Manager --> Settings will open up the Settings window. From there just select Simulation and you will get its options.
Click to expand...
But ISIM is not there. Is there a way to enter manual simulations?
 

Status
Not open for further replies.

Similar threads

Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…