Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Simulating UCPBG cell with HFSS.

Status
Not open for further replies.

si14

Full Member level 3
Joined
Sep 27, 2006
Messages
173
Helped
16
Reputation
32
Reaction score
6
Trophy points
1,298
Location
North America
Activity points
2,196
hfss ucpbg

Hello to every one.

I want to simulate a UCPBG cell with HFSS.

To obtain the characteristics of the UCPBG cell, the scattered fields (reflection phase) are needed to be known.

Let's see what I've done, then get to the problem:

1) create the ground.
2) create the substrate.
3) create the UCPBG cell.
4) create the Air.
5) define the boundries as:
ground and UCPBG cell as "PEC".
the top face of the Air box as "radiating surface"
the other 4 faces of the Air box are definde as 2 pairs of "master" and "slave".

6) define an excitation:
A plane wave form the bottom (0,0,0)

7) Simulate the project.

!
Now I am wondering how to see the characteristics of this cell.

I mean I cannot see any "reflection phase" term in the:

HFSS --> RESULTS --> CREATE REPORT --> TRACE .

Now what should I do?
(P.S. I see somewhere that a POLYLINE should be definde to see the reflection phase!
Is that true? If yes, how?)

Thank you for your attention.
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top