Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Simulated S11 does not resemble measured S11 in HFSS model!!

Status
Not open for further replies.
L

Lanus

Newbie level 4
Newbie level 4
Joined
Nov 20, 2005
Messages
7
Helped
1
Reputation
2
Reaction score
1
Trophy points
1,283
Activity points
1,344
HFSS MODEL

Hey guys,
I have been trying to simulate (in HFSS) a 7 turn archimedean spiral antenna placed flush to a dielectric(oil). I have also fabricated the exact same antenna and taken measurements. The simulated S11(It is a one port network), does not resemble the measured S11 at all. Can somebody please help me out with this?I have been struggling with this problem with a while now and im very frustrated.I could upload my design if anyone could help me.
Thanks guys
 

HFSS

Pls post the . Then maybe we can help

Added after 54 seconds:

Sorry pls post the was what i was trying to say
 

Re: HFSS MODEL

If you can upload you model then i can try to help you
BR
 

Re: HFSS MODEL

Here is the file,it si in version 10,so i dont think it will run in earlier versions.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top