Apr 13, 2013 #1 N noisepic Member level 3 Joined Nov 2, 2012 Messages 66 Helped 0 Reputation 0 Reaction score 0 Trophy points 1,286 Activity points 1,781 I've design inner, outer and dielectric to get desired impedance. I try to simulate in CST but: I try to use port ( can define impedance) but can't simulate due to the port must not in PEC. I try wave port but I can not define system impedance . Pls give suggestion.
I've design inner, outer and dielectric to get desired impedance. I try to simulate in CST but: I try to use port ( can define impedance) but can't simulate due to the port must not in PEC. I try wave port but I can not define system impedance . Pls give suggestion.
Apr 13, 2013 #2 P Positron89 Member level 1 Joined Jan 16, 2012 Messages 39 Helped 11 Reputation 20 Reaction score 10 Trophy points 1,288 Activity points 1,518 Hi, u could try to design the waveguide port around the dielectric. I have attached an image below. Pick face the dielectric and increase the width to around 0.1 You should get the impedance. I did it for 50 OHm.
Hi, u could try to design the waveguide port around the dielectric. I have attached an image below. Pick face the dielectric and increase the width to around 0.1 You should get the impedance. I did it for 50 OHm.