STOIKOV
Full Member level 4
An IBIS input model is supposed to work as a load and an IBIS output model as a driver. So, a topology "IBIS output model to IBIS input model" can be easily built.
But, I'm trying to simulate a buffer from its input to its output and have the next doubt. I have the "output of the input" connected to the "input of the output" as shown, but don't get a signal in the final node of the topology because the output model cannot be excited. Wonder if this kind of connection is correct or each model have to be controlled with independient signals I mean without interacting "output of the input" with the "input of the output". Appreciate your help.
V1 CLK GND PULSE 0 2.5 1n 500p 500p 4.5n 10n $ CK 100M
B_buff_input VDD GND CLK CLK_out_of_in $ Input buffer
+file='cyclone2.ibs' model='2c_lvds25_rin'
+typ=typ
+buffer=input
B_buff_output VDD GND CLK_out CLK_out_of_in $ Output buffer
*+file='cyclone2.ibs' model='2c_lvds25_co'
*+typ=typ
*+buffer=output
But, I'm trying to simulate a buffer from its input to its output and have the next doubt. I have the "output of the input" connected to the "input of the output" as shown, but don't get a signal in the final node of the topology because the output model cannot be excited. Wonder if this kind of connection is correct or each model have to be controlled with independient signals I mean without interacting "output of the input" with the "input of the output". Appreciate your help.
V1 CLK GND PULSE 0 2.5 1n 500p 500p 4.5n 10n $ CK 100M
B_buff_input VDD GND CLK CLK_out_of_in $ Input buffer
+file='cyclone2.ibs' model='2c_lvds25_rin'
+typ=typ
+buffer=input
B_buff_output VDD GND CLK_out CLK_out_of_in $ Output buffer
*+file='cyclone2.ibs' model='2c_lvds25_co'
*+typ=typ
*+buffer=output
