Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

[SOLVED] Sim900 sms problem; the AT Commands seen in the received SMS

Status
Not open for further replies.

abdi110

Member level 3
Member level 3
Joined
Mar 5, 2015
Messages
60
Helped
1
Reputation
2
Reaction score
1
Trophy points
1,288
Visit site
Activity points
1,728
Hi everybody...
I am new to this forum and this is my first post.
I have a problem with sim900 when i send sms with it, the AT Commands will be sent in the SMS content and is seen in the sms recieved.
for example the received SMS is as below:
ATAT+CMGF=1AT+CMGS="09XXXXXX"
SMS TEXT
 

Post your code

Dear ADGAN;
So thanks, my problem has been solved by increasing delays between AT commands.
now i have another question:
under the sim 900 module there is a circle and nine points? what shal i do in pcb with them?
could you please help?
Thanks again
 

DO NOT have any PCB tracks or fills in those areas, follow the SIM900 hardware document for the keep out area sizes.

Cheers
 
Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top