Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

SIM900 not responding to AT commands

Status
Not open for further replies.
R

rckr

Newbie level 3
Newbie level 3
Joined
May 19, 2013
Messages
4
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Visit site
Activity points
1,304
Hello,

I am usind ICOMSAT SIMCOM900 GSM Shield with Arduino UNO . The GSM Shield displays

RDY

+CFUN: 1

+CPIN: READY

Call Ready

on startup and also responds to incoming call but when i send any AT command , it responds with ERROR.
What can be the problem?
 

hey
would you please help me
i want to know how much ampere current is needed by sim900?
 

no sorry
but if you can help me
i have connected my sim900 to a lcd and AT89S51...i m giving input from an 12v 500mA
adapter converted to 5v later...my mcu is working properly with lcd but when i send a command to sim900A i receive a a 5X7 matrix boz on the lcd
do you lnow anything about it?

- - - Updated - - -

no sorry
but if you can help me
i have connected my sim900 to a lcd and AT89S51...i m giving input from an 12v 500mA
adapter converted to 5v later...my mcu is working properly with lcd but when i send a command to sim900A i receive a a 5X7 matrix box on the lcd
do you lnow anything about it?

- - - Updated - - -

re anybody to help
i m waiting for the help from last 2 days but no response from anyone
really weird
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top