Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Silvaco Atlas convergence problem

Status
Not open for further replies.

Lrecos

Newbie level 3
Joined
Nov 17, 2016
Messages
3
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Activity points
19
I want to simulate 3d model in Silvaco atlas. It is a simple nwell with n+ structure and a magentic field, but when I simulate it with "solve name=anode ianode=0.001" is there a convergence and I don't know why?
Can anyone please help me....

Enclosed is my code

Code:
go atlas

set w=54
set l=5.2
set a=3.2
set l2=2

mesh three.d

x.m l=0  s=0.2
x.m l=$l+$w+$l s=0.2
y.m l=0 s=0.2
y.m l=1.2  s=0.2
z.m l=0  s=0.2
z.m l=$w+$l+$l s=0.2


region num=1 Silicon y.min=0 y.max=0


region num=2 Silicon x.min=0 x.max=$w+$l+$l y.min=0 y.max=1 z.min=0 z.max=$w+$l+$l

#Anode n+ contact
region num=3 Silicon x.min=$a x.max=$l2+$a y.min=0.8 y.max=1 z.min=$a z.max=$l2+$a
#Cathode n+ contact
region num=4 Silicon x.min=$l+$w x.max=$l+$w+$l2 y.min=0.8 y.max=1 z.min=$l+$w z.max=$l+$w+$l2
#hall4 n+ contact
region num=5 Silicon x.min=$l+$w x.max=$l+$w+$l2 y.min=0.8 y.max=1 z.min=$a z.max=$l2+$a
#hall 3 n+ contact
region num=6 Silicon x.min=$a x.max=$l2+$a y.min=0.8 y.max=1 z.min=$l+$w z.max=$l+$w+$l2


elec num=1 name=anode x.min=$a x.max=$l2+$a y.min=1 y.max=1 z.min=$a z.max=$l2+$a
elec num=2 name=cathode x.min=$l+$w x.max=$l+$w+$l2 y.min=1 y.max=1 z.min=$l+$w z.max=$l+$w+$l2
elec num=3 name=hall4 x.min=$l+$w x.max=$l+$w+$l2 y.min=1 y.max=1 z.min=$a z.max=$l2+$a
elec num=4 name=hall3 x.min=$a x.max=$l2+$a y.min=1 y.max=1 z.min=$l+$w z.max=$l+$w+$l2



doping region=1 conc=1e16 unif p.type
doping region=2 conc=7e16 unif n.type
doping region=3 conc=1e20 unif n.type
doping region=4 conc=1e20 unif n.type
doping region=5 conc=1e20 unif n.type
doping region=6 conc=1e20 unif n.type


contact num=1 current
contact num=3 current
contact num=4 current 


models srh by=0.02

method bicgst

solve init

solve prev

log outfile=magneticex03_1.log
solve name=anode ianode=0.001
log off
 
save outf=magneticex03_1.str
tonyplot3d magneticex03_1.str -set magneticex03_1_str.set

quit
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top