Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

signal and power integrity for pcb designers

Status
Not open for further replies.

dmd4raj

Member level 4
Joined
Jun 23, 2008
Messages
69
Helped
11
Reputation
22
Reaction score
7
Trophy points
1,288
Activity points
1,722
Hi...


If any one having the signal and power integrity for pcb designers pdf can you please send me ...

Thanks in advance

Regards
RAJAN.K
 

petiteagle

Newbie level 3
Joined
Jan 30, 2010
Messages
3
Helped
1
Reputation
2
Reaction score
1
Trophy points
1,283
Location
Los Angeles
Activity points
1,301
The thread is old, but have you guys found this book? If so, I desperately need it now...
 

marce

Advanced Member level 5
Joined
Feb 23, 2010
Messages
2,015
Helped
623
Reputation
1,246
Reaction score
608
Trophy points
1,393
Location
UNITED KINGDOM
Activity points
13,954
Generic Links

Some interesting reading and links.
"Electromagnetic Compatability Engineering" Henry Ott ISBN798-470-18930-6
"High-Speed Digital Design" Howard Johnson & Martin Graham ISBN 0-13-395724-1
"Right The First Time" Lee W. Ritchey Free Download Right the First Time

Henry Ott Consultants
Tech Tips

The EMC Compliance Club
A source of some excellent articles by Keith Armstrong and others, including a few articles on shielding audio equipement
EMC Information Centre - The EMC Journal (Free in the UK)

Signal Integrity Sites
beTheSignal.com
http://www.sigcon.com/pubsIndex.htm
Speeding Edge consultants specialize in high-speed PCB and system design disciplines


A simple presentation of some of the Issues.
http://www.x2y.com/filters/TechDay0...log_Designs_Demand_GoodPCBLayouts _JohnWu.pdf

And one of my favorites:
Especially number one, regarding clocks, which will apeal to all those that instead of using the
clock or crystal next to a device on a board, add a seperate board with long leads to achieve low jitter.
The 10 Best Ways to Maximize Emission from Your Product
 

techzee

Junior Member level 3
Joined
Jul 15, 2010
Messages
30
Helped
10
Reputation
20
Reaction score
6
Trophy points
1,288
Location
India
Activity points
1,480
For signal integrity calyptech offers some good understanding about SI. Eric Bogatin simplified Signal integrity is a good start.
SIgnal integrity we can classify it in 2 brad catagories
1. Frequency Domain analysis
2. Time domain analysis
in time domain analysis we can analyze 2 things
i) signal quality which we can call it as reflection analysis, as we concentrate more on signal quality that is overshoot, undershoot non-monotonic regions during transitions.
ii) The timing analysis, which is the timing budget calculation that is Setup time and Hold time margins for all the signals like data, address..

Power integrity concern even am not much familiar with it, may be some one can suggest some good books on it. Like why we going for Power integrity, how do we analyze the issues for Power integrity.
Does PI means for whether the Board IC's take proper amount of voltage allotted to them. If so what is the relation between PI analysis and EMC analysis. does that correlate?

Lets get back to some technical discussion, we can clarify each others doubts and questionnaire

---------- Post added at 18:36 ---------- Previous post was at 18:31 ----------

I forgot to tell about Frequency domain analysis. The analysis is mainly focused on the Return loss and Insertion loss, TDR as the frequency is going to be more than 1GHz the effect of every component on the board becomes very vital and significant. EVery inch of the trace and VIA needs to be analyzed for the channel to pass. Say if VIA's are the problem due to stub length then proper usage of back drilling and ways to minimize the loss need to be understood.
 

techzee

Junior Member level 3
Joined
Jul 15, 2010
Messages
30
Helped
10
Reputation
20
Reaction score
6
Trophy points
1,288
Location
India
Activity points
1,480
Power integrity by Raj Nair seems to be good.
 
  • Like
Reactions: info_req

    info_req

    Points: 2
    Helpful Answer Positive Rating
    V

    Points: 2
    Helpful Answer Positive Rating

petiteagle

Newbie level 3
Joined
Jan 30, 2010
Messages
3
Helped
1
Reputation
2
Reaction score
1
Trophy points
1,283
Location
Los Angeles
Activity points
1,301
Thanks a lot everyone! I actually used some of the links and got my board routed so that there's no more troubles with the SI!
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Top