Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Siemens C35 connection problem

Status
Not open for further replies.

thilan

Newbie level 2
Joined
Apr 29, 2008
Messages
2
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,299
Hi everyone....

I'm using a Siemens C35 as a GSM modem to send and receive SMS. I have the data cable and the phone is working properly. I have referred to previous threads but with the settings mentioned in those articles, this phone doesn't seem to be working.

Settings are:
Baud rate : 19200bps
Data bits : 8
Parity : none
Stop bits : none
Flow control : none

Is there any other setting in the phone or in hyperterminal that I should alter? And, is there some way of enabling the data (RS232) port of the mobile phone?

Thank you in advance. Please help.......

:cry:
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Top